Outdoor AC Power Box Installation
The AC power box is a robust, outdoor, all-weather, easy-to-install solution for powering your Sensera Camera from a 120V AC power source. You can use an outdoor-rated 3-prong extension cord for power, or a qualified electrician can run conduit appropriate for outdoor use to the box.
The AC power box comes with a simple pole mounting solution or it can be fastened to a horizontal surface (fasteners not included). It has a built-in 10-foot cable and an included 15-foot extension cable for connecting to the Sensera Camera, providing a total of 25 feet of cable.
Vertical Pole Installation
1. Use pliers to remove lower cover knock-out to allow extension cord to enter weather-resistant cover.
2. Install transparent cover onto upper hinge pins to allow the cover to open vertically.
3. Close the cover and be sure it snaps shut correctly.
4. Use a #2 Phillips screwdriver and the 4 supplied 10-32 screws and locknuts to fasten the pole mount bracket to the enclosure.
5. Mount box to pole using included band clamps.
6. Connect cable to camera, using included 15-foot extension cable if necessary.
7. Connect the box to 120v power with a 3-prong outdoor rated extension cord connected to a GFCI outlet.
Horizontal Surface Installation
1. Use pliers to remove one of the two small knock-outs to allow extension cord to enter the weather-resistant cover.
2. Install the transparent cover onto the hinge pins to allow the cover to open vertically.
3. Close the cover and be sure it snaps shut correctly.
4. Securely fasten the enclosure horizontally using appropriate #10 fasteners (not included).
5. Connect cable to camera, using included 15-foot extension cable if necessary.
6. Connect the box to 12v power with a 3-prong outdoor rated extension cord connected to a GFCI outlet.
Powering the AC Box via Conduit
This installation should only be done by a qualified electrician. Improper installation can lead to injury or death. Please contact Sensera if details are needed.
